Make sure the changes you made survive a relabeling:
```
restorecon -R /www
```
It is possible to relabel a file system using the fixfiles command, or to relabel based on the RPM database. Use the following command to relabel a file system only using the fixfiles command:
```
fixfiles relabel
```
Use the following command to relabel a file system based on the RPM database:
```
fixfiles -R <packagename> restore
```

If you have to relable the system, just create `/.autorelabel` file and reboot the server.

Prepare auto relabeling during boot:
```
touch /.autorelabel
```

Note:	Before reboot, make sure selinux is in permissive mode! System does not always reboot after enforcing SELINUX.

Make sure the relabeling is set to permissive to allow the relabeling during boot:

touch /.autorelabel
grep '^SELINUX' /etc/sysconfig/selinux
SELINUX=permissive
SELINUXTYPE=targeted
reboot

If the server fails to boot, put in the end of the follwing line in grub2 prompt:
```
linux16  ... rd.break enforcing=0
```

Note:	`rd.break` asks for a break at an early stage of the boot process. `enforcing=0` puts the system into SELinux Permissive mode. Don’t confuse with `selinux=0` that completely disables SELinux.

Audit the audit log (in general):

cat /var/log/audit/audit.log | audit2why

Unordered List Itemor more speicific for example for the httpd service:
```
grep httpd /var/log/audit/audit.log |audit2why
```

Label the changes you made with semanage:

cat /var/log/audit/audit.log | audit2allow

You can also use the sealert command to get a report of all problems related to selinux. But, you have to install first following package (on CentOS, RHEL or Fedora distributions):
```
dnf -y install setroubleshoot-server
```
```
sealert -a /var/log/audit/audit.log
```

This gives, as an example, following result:

100% done
found 1 alerts in /var/log/audit/audit.log
--------------------------------------------------------------------------------
 
SELinux is preventing logrotate from map access on the file /etc/logrotate.d/mariadb.
 
*****  Plugin restorecon (92.2 confidence) suggests   ************************
 
If you want to fix the label.
/etc/logrotate.d/mariadb default label should be etc_t.
Then you can run restorecon. The access attempt may have been stopped due to insufficient permissions to access a parent directory in which case try to change the following command accordingly.
Do
# /sbin/restorecon -v /etc/logrotate.d/mariadb
 
*****  Plugin catchall_boolean (7.83 confidence) suggests   ******************
 
If you want to allow domain to can mmap files
Then you must tell SELinux about this by enabling the 'domain_can_mmap_files' boolean.
 
Do
setsebool -P domain_can_mmap_files 1
 
*****  Plugin catchall (1.41 confidence) suggests   **************************
 
If you believe that logrotate should be allowed map access on the mariadb file by default.
Then you should report this as a bug.
You can generate a local policy module to allow this access.
Do
allow this access for now by executing:
# ausearch -c 'logrotate' --raw | audit2allow -M my-logrotate
# semodule -X 300 -i my-logrotate.pp
 
 
Additional Information:
Source Context                system_u:system_r:logrotate_t:s0-s0:c0.c1023
Target Context                unconfined_u:object_r:mysqld_etc_t:s0
Target Objects                /etc/logrotate.d/mariadb [ file ]
Source                        logrotate
Source Path                   logrotate
Port                          <Unknown>
Host                          <Unknown>
Source RPM Packages
Target RPM Packages           mariadb-server-10.3.11-1.fc29.x86_64
Policy RPM                    selinux-policy-3.14.2-47.fc29.noarch
Selinux Enabled               True
Policy Type                   targeted
Enforcing Mode                Enforcing
Host Name                     danweb2
Platform                      Linux danweb2 4.20.3-200.fc29.x86_64 #1 SMP Thu
                              Jan 17 15:19:35 UTC 2019 x86_64 x86_64
Alert Count                   1
First Seen                    2019-02-08 03:19:01 CET
Last Seen                     2019-02-08 03:19:01 CET
Local ID                      17b1c2f9-04fa-43c8-b799-9221390e3fa6
 
Raw Audit Messages
type=AVC msg=audit(1549592341.516:621241): avc:  denied  { map } for  pid=19834 comm="logrotate" path="/etc/logrotate.d/mariadb" dev="dm-0" ino=2494230 scontext=system_u:system_r:logrotate_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:mysqld_etc_t:s0 tclass=file permissive=0
 
 
Hash: logrotate,logrotate_t,mysqld_etc_t,file,map

Unordered List ItemYou need to install the following package:

yum install setools-console setroubleshoot-server setroubleshoot-plugins policycoreutils-python-utils

Unordered List ItemCheck, what state has selinux:
```
getenforce
```

Per default, selinux does not allow proxy connections to other hosts, you can enable this:
```
setsebool -P httpd_can_network_connect true
```

To get a list of all boleans, you can use the getsebol -a command:

getsebool -a |grep http
httpd_anon_write --> off
httpd_builtin_scripting --> on
httpd_can_check_spam --> off
httpd_can_connect_ftp --> off
httpd_can_connect_icinga2_api --> on
httpd_can_connect_ldap --> off
httpd_can_connect_mythtv --> off
httpd_can_connect_zabbix --> off
httpd_can_manage_icingaweb2_config --> on
httpd_can_network_connect --> off
httpd_can_network_connect_cobbler --> off
httpd_can_network_connect_db --> off
httpd_can_network_memcache --> off
httpd_can_network_relay --> off
httpd_can_sendmail --> off
httpd_can_write_icinga2_command --> on
httpd_dbus_avahi --> off
httpd_dbus_sssd --> off
httpd_dontaudit_search_dirs --> off
httpd_enable_cgi --> on
httpd_enable_ftp_server --> off
httpd_enable_homedirs --> off
httpd_execmem --> off
httpd_graceful_shutdown --> off
httpd_manage_ipa --> off
httpd_mod_auth_ntlm_winbind --> off
httpd_mod_auth_pam --> off
httpd_read_user_content --> off
httpd_run_ipa --> off
httpd_run_preupgrade --> off
httpd_run_stickshift --> off
httpd_serve_cobbler_files --> off
httpd_setrlimit --> off
httpd_ssi_exec --> off
httpd_sys_script_anon_write --> off
httpd_tmp_exec --> off
httpd_tty_comm --> off
httpd_unified --> off
httpd_use_cifs --> off
httpd_use_fusefs --> off
httpd_use_gpg --> off
httpd_use_nfs --> off
httpd_use_openstack --> off
httpd_use_sasl --> off
httpd_verify_dns --> off
mysql_connect_http --> off
named_tcp_bind_http_port --> off
prosody_bind_http_port --> off

For example, if you need to connect an ldap server or a mysql database from a web application, you should set this boleans to true:
```
setsebool -P httpd_can_network_connect_db true
setsebool -P httpd_can_connect_ldap true
```

For example the Bolt CMS requires to write files in the in public, cache and config folders. But, selinux does not allow this per default.

Copy the attributes from apache default webroot directory:

chcon -t httpd_sys_rw_content_t /var/www/ds/app/cache -R

For the bolt setup, you can replace the base directory variable:

base="/var/www"
d=ds
 
# make sure the httpd sys context is setup properly:
semanage fcontext -a -t httpd_sys_content_t ${base}/${d}'(/.*)?'
restorecon -R ${base}/$d
 
# next folder and file have to be read/write:
semanage fcontext -a -t httpd_sys_rw_content_t ${base}/$d/app/cache'(/.*)?'
semanage fcontext -a -t httpd_sys_rw_content_t ${base}/$d/app/config'(/.*)?'
semanage fcontext -a -t httpd_sys_rw_content_t ${base}/$d/public/files'(/.*)?'
semanage fcontext -a -t httpd_sys_rw_content_t ${base}/$d/public/extensions'(/.*)?'
semanage fcontext -a -t httpd_sys_rw_content_t ${base}/$d/extensions'(/.*)?'
 
# make all permanent (recuresive)
restorecon -R ${base}/$d/app/cache
restorecon -R ${base}/$d/app/config
restorecon -R ${base}/$d/public/files
restorecon -R ${base}/$d/public/extensions
restorecon -R ${base}/$d/extensions

It’s also possible to a reference copy of the selinux attributes:
```
sudo chcon -R --reference=/usr/share/nginx/html /www
```
Copy the attributes from apache default webroot directory:
```
sudo chcon -R --reference=/var/www/html /www
```

Note:	If you want to have those changes to default back, you must execute `restorecon -R /<directory>`!

Make labeling changes back to default:
```
restorecon -R /www
```

If the icinga service does not start after configuring API, you should check the following:

Check, if port 5665 is allowed:
```
semanage port -l | grep 5665
```

If empty, you have to configure it:

semanage port -a -t icinga2_port_t -p tcp 5665

Check, if port 5665 is allowed:
```
semanage port -l | grep 5665
```

Not yet done …

If you have an application which has not a standart port definition, you can also define a port for a service.

Example for configuring port 8888 for httpd service:
```
semanage port -a -t httpd_port_t -p tcp 8888
```

For a password change, next procedure is probably the easiest.

Interrupt grub startup and type E to edit the default boot option
Add at the line where linux16 is listed first, following rd.break enforcing=0
Remount /sysroot, but writable: mount –o remount,rw /sysroot
Do a chroot to /sysroot: chroot /sysroot
Do your changes
You have to relabel the filesystems, just touch /.autorelabel in /sysroot or reboot and add autorelabel=1 in grub

selinux=0 (Bad idea)
If you want to Disable SELinux entirely. You can boot the system with the SELINUX=0 kernel parameter. This will cause the kernel to not load any of the SELinux infrastructure. The init scripts will notice that you booted with SELINUX=0 and will touch /.autorelabel themselves. This will cause the machine to automatically relabel the next time you boot with SELINUX enabled. We do this because anytime you are booted with SELNUX=0 files will not get a label. So the next time the system boots the SELinux would report these files as file_t and almost no domains can interfact with a file_t (Unlabeled file). Files like /etc/resolv.conf get recreated at boot time and probably would get this label and the next time SELinux booted, all heck would break loose.
enforcing=0
Setting this parameter will cause the machine to boot in permissive mode. If your machine will not boot in enforcing mode, this can allow you to boot it and figure out what is wrong. Sometimes you file system can get so messed up that this parameter is your only option. The nice thing about this option, the system continues to create the labels correctly. The AVC messages that are created via this command can be different then in enforcing mode. There are two differences in enforcing mode, every access denial is reported, in permissive only the first denial is reported. However in Enforcing mode you might get a denial on reading a directory and the app will stop. In permissive mode you would get the same avc message but then you would get an avc for each denial when the app continues reading files in the directory.
autorelabel=1
This parameter will force the system to relabel. It does the same thing as “touch /.autorelabe; reboot”. Sometimes, if the machines labeling is really bad, you will need to boot in permissive mode in order for the autorelabel to succeed. An example of this is switching from strict to targeted policy. In strict policy shared libraries are labeled as shlib_t while ordinary files in /lib directories are labeled lib_t. strict policy only allows confined apps to execute shlib_t. In targeted policy shlib_t and lib_t are aliases. (Having these files labeled differently is of little security importance and leads to labeling problems in my opinion). So every file in /lib directories gets the label lib_t. When you boot a machine that is labeled for targeted with strict policy the confined apps try to execute lib_t labeled shared libraries so and they are denied. /sbin/init tries this and blows up. So booting in permissive mode allows the system to relabel the shared libraries as shlib_t and then the next boot can be done in enforcing.

SELinux

General

File contexts

Boleans

Labeling

Analize autid log

Setup

Example applications

Nginx Proxy

HTTP

Icinga

Piwik (Matomo)

Configure non-standard ports

Problems during boot

Procedure to relabel

Boot parameters described

Creation of selinux module

DS Wiki